產品資訊

MCU

·         Cortex®­M0, frequency up to 48MHz.

·         Memory (16KB embedded Flash storage and 2KB SRAM.)

·         Built-in 48MHz HSI high-speed oscillator.

·         Multiple low power modes include Sleep mode, Stop mode and Deep Stop mode.

·         5 timers:

–    One 16-bit 4-channel advanced timer (TIM1), capable of generating four PWM outputs or three complementary PWM pairs, support center- or edge-aligned PWM mode, support hardware dead time insertion and fault brake, support PWM phase-shift output mode.

–    One 16-bit 4-channel general purpose timer (TIM3), capable of generating four PWM outputs or capture four channel input signals, support decode of hall sensor and quadrature encoder, support infrared decode.

–    One 16-bit basic timer (TIM14), capable of generating one PWM output or capture one channel input signal.

–    One watchdog timer equipped with independent clock source (IWDG).

–    One 24-bit Systick timer.

·         Up to 10 fast I/O ports:

–    All I/O ports can be mapped to 10 external interrupts.

–    All I/O ports can accept input or generate output signal voltage level is not higher than VDD.

·         One USART1.

·         One 12-bit ADC (Analog-to-Digital converter) supports 1M SPS conversion rate, with 8 external inputs and 1 internal input that can sample on-chip voltage sensor.

·         Embedded CRC engine

·         Serial Wire Debug (SWD) for debug function.

·         Operating temperature range includes -40°C ~ 105°C industrial tier.

MCD

·         1-Hall sine wave PWM drive

·         Pre-driver for external N-ch MOSFET

·         Closed loop speed control, configurable speed curve

·         Adjustable driving current for the gate of external MOSFET

·         Operating voltage range: 5 to 16 V

·         Serial interface

·         Standby mode

·         Soft start

·         Output RPM information

·         Built-in protection features:
Under Voltage Lock Out (UVLO), Under voltage protection for the charge pump,
Over Voltage Protection (OVP), Lock detection, Thermal Shutdown (TSD),
Over Current limitation (OCL), Over current protection (ISD)