/**
  @page RCC_ClockConfig RCC_ClockConfig example
  
  @verbatim
  ****************** (C) COPYRIGHT 2023 Megawin Technology *******************
  * @file    RCC/RCC_ClockConfig/readme.txt 
  * @author  Megawin Application Team
  * @version V0.0.4
  * @date    16-June-2023
  * @brief   Description of the RCC RCC_ClockConfig example.
  ******************************************************************************
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, MEGAWIN SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
  * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM
  * THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  ******************************************************************************
   @endverbatim

@par Example Description 

This example describes how to configure the system clock (external 8MHz crystal oscillator is multiplied to 96MHz by PLL).

In this example, Main clock is from PLL clock and it is configured at 96MHz. The PLL clock is based on 8MHz HSE. APB1 clock is the 2 frequency division of the Main clock, APB2 clock is from Main clock.


@par Directory contents 

  - RCC/RCC_ClockConfig/RCC_ClockConfig.uvprojx      MDK5 project file
  - RCC/RCC_ClockConfig/RCC_ClockConfig.uvoptx       MDK5 project options file
  - RCC/RCC_ClockConfig/JLinkSettings.ini            Jlink settings file
  - RCC/RCC_ClockConfig/main.c                       Main program


@par Hardware and Software environment 

  - Hardware environment
    - HSE crystal is 8MHz
    - The chip pins are connected as follows：
      - PB10 pin is connected to LED1
      - PB11 pin is connected to LED2


@par How to use it ? 

In order to make the program work, you must do the following :
 - Open RCC_ClockConfig.uvprojx from this example folder by Keil MDK5
 - Rebuild all files and load your image into target memory
 - Run the example 
   
 * <h3><center>&copy; COPYRIGHT 2023 Megawin Technology</center></h3>
 */
