/**
  @page I2C_Simulate_24C02 I2C_Simulate_24C02 example
  
  @verbatim
  ****************** (C) COPYRIGHT 2023 Megawin Technology *******************
  * @file    I2C/I2C_Simulate_24C02/readme.txt 
  * @author  Megawin Application Team
  * @version V0.0.4
  * @date    16-June-2023
  * @brief   Description of the I2C I2C_Simulate_24C02 example.
  ******************************************************************************
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, MEGAWIN SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
  * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM
  * THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  ******************************************************************************
   @endverbatim

@par Example Description 

This example describes how to use I2C slave mode to simulate a 24C02 (EEPROM).

In this example, Main clock is from PLL clock and it is configured at 96MHz. The PLL clock is based on 8MHz HSE. APB1 clock is the 2 frequency division of the Main clock, APB2 clock is from Main clock.

In this example,the slave address of the simulated 24C02 is 0xC4.


@par Directory contents 

  - I2C/I2C_Simulate_24C02/I2C_Simulate_24C02.uvprojx   MDK5 project file
  - I2C/I2C_Simulate_24C02/I2C_Simulate_24C02.uvoptx    MDK5 project options file
  - I2C/I2C_Simulate_24C02/JLinkSettings.ini            Jlink settings file
  - I2C/I2C_Simulate_24C02/main.c                       Main program


@par Hardware and Software environment 

  - Hardware environment
    - HSE crystal is 8MHz
    - The I2C master needs to be connected to PB6 (I2C1_SCL), PB7 (I2C1_SDA)


@par How to use it ? 

In order to make the program work, you must do the following :
 - Open I2C_Simulate_24C02.uvprojx from this example folder by Keil MDK5
 - Rebuild all files and load your image into target memory
 - Run the example 
   
 * <h3><center>&copy; COPYRIGHT 2023 Megawin Technology</center></h3>
 */
