/**
  @page FLASH_Program FLASH_Program example
  
  @verbatim
  ****************** (C) COPYRIGHT 2023 Megawin Technology *******************
  * @file    Flash/FLASH_Program/readme.txt 
  * @author  Megawin Application Team
  * @version V0.0.4
  * @date    16-June-2023
  * @brief   Description of the Flash FLASH_Program example.
  ******************************************************************************
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, MEGAWIN SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
  * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM
  * THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  ******************************************************************************
   @endverbatim

@par Example Description 

This example describes how to program the on-chip FLASH.

In this example, Main clock is from PLL clock and it is configured at 96MHz. The PLL clock is based on 8MHz HSE. APB1 clock is the 2 frequency division of the Main clock, APB2 clock is from Main clock.


@par Directory contents 

  - Flash/FLASH_Program/FLASH_Program.uvprojx        MDK5 project file
  - Flash/FLASH_Program/FLASH_Program.uvoptx         MDK5 project options file
  - Flash/FLASH_Program/JLinkSettings.ini            Jlink settings file
  - Flash/FLASH_Program/main.c                       Main program


@par Hardware and Software environment 

  - Hardware environment
    - HSE crystal is 8MHz


@par How to use it ? 

In order to make the program work, you must do the following :
 - Open FLASH_Program.uvprojx from this example folder by Keil MDK5
 - Rebuild all files and load your image into target memory
 - Run the example 
   
 * <h3><center>&copy; COPYRIGHT 2023 Megawin Technology</center></h3>
 */
