/**
  @page VCMP_OutputConfig_LPTIM_Gate VCMP comparation Output connect to LPTIM Gate example
  
  @verbatim
  ****************** (C) COPYRIGHT 2023 megawin Technology *******************
  * @file    VCMP/VCMP_OutputConfig_LPTIM_Gate/readme.txt 
  * @author  megawin OutputConfig_LPTIM_Gate Team
  * @version V0.0.5
  * @date    13-August-2024
  * @brief   Description of the VCMP VCMP_OutputConfig_LPTIM_Gate example.
  ******************************************************************************
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, MEGAWIN SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
  * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM
  * THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  ******************************************************************************
   @endverbatim

@par Example Description 

This example describes how to put VCMP comparation outcome into LPTIM timer gate.

In this example, Main clock is configured at 24MHz.

The UART1 is configured as follow:
  - BaudRate: 115200
  - Word Length: 8

To use this example, you should give VCMP_IN1(PC5) a voltage lower than 1.25v.


@par Directory contents 

  - VCMP/VCMP_OutputConfig_LPTIM_Gate/VCMP_OutputConfig_LPTIM_Gate.uvprojx   MDK5 project file
  - VCMP/VCMP_OutputConfig_LPTIM_Gate/VCMP_OutputConfig_LPTIM_Gate.uvoptx    MDK5 project options file
  - VCMP/VCMP_OutputConfig_LPTIM_Gate/JLinkSettings.ini                      Jlink settings file
  - VCMP/VCMP_OutputConfig_LPTIM_Gate/main.c                                 Main program


@par Hardware and Software environment 

  - Hardware environment
    - The chip pins are connected as follows：
      - UART1 (PD5, PD6) is connected to PC serial port


@par How to use it ? 

In order to make the program work, you must do the following :
 - Open VCMP_OutputConfig_LPTIM_Gate.uvprojx from this example folder by Keil MDK5
 - Rebuild all files and load your image into target memory
 - Run the example 
   
 * <h3><center>&copy; COPYRIGHT 2023 megawin Technology</center></h3>
 */
